How to make a twister with your own hands at home

Twister like in KFC: prepare the famous quick dish yourself

Sometimes you really want to treat yourself to fast food. Well-known companies offer many quick meals, but not all of them are healthy, although they have a very rich and pleasant taste. That is why many began to prepare fast food at home with their own hands, in order to be completely confident in the naturalness of the finished products. One of these products is a twister like in KFC. It can be very easily made in your own kitchen from the simplest ingredients.

The calorie content of this dish is about 215 kcal per 100 g, so it should not be consumed too often. Let's look at how to make a twister like in KFC step by step with photos.

What are strips and how are they prepared?

Strips, translated from English, are strips of meat that are fried in a large amount of oil and pre-breaded. It’s not difficult to prepare strips like in KFC today in your kitchen. You just need to stock up on the main ingredient - chicken fillet. This meat is very easy to cut into strips. This shape allows the strips not to fall apart during cooking, and also to fry well and quickly without losing their beautiful appearance after frying. Of course, you can use other meat, but in this case the pieces will be very small and probably tough.

Best articles How to pickle boletus mushrooms - culinary recipe

A very important and least important secret of the dish is the breading. Thanks to it, chicken meat does not absorb a huge amount of oil during frying. It is the breading that absorbs excess fat, also leaving more of it on the paper towel on which the finished products are laid out.

To bread chicken strips you can use:

Breadcrumbs
Oat or corn flakes
Sesame seeds
Crushed potato chips
Egg batter
Flour
Paprika
Ground black or red pepper

In order for the breading to better envelop the meat and stick to it well, eggs, mayonnaise or sour cream are often added to it. A wide variety of breading will give you the opportunity to choose the ideal snack not only in appearance, but also in taste.

It will be great to prepare a variety of breadings and experiment while cooking by creating unusual chicken strips of different flavors. A very simple and at the same time delicious fast food dish will delight all your loved ones without a doubt.

I would like to invite you to learn how to cook it at home yourself using the recipes below. And you will be convinced that such homemade chicken strips prepared with your own hands will not be harmful to the health of you and your family.

Detailed step-by-step twister recipe as in FSC

This instruction includes the process of preparing a twister from the flatbread to the filling.

30 g softened butter;
230 g wheat flour;
A teaspoon of salt;
120 ml hot water (temperature about 60 degrees).

A teaspoon of balsamic vinegar;
3 tablespoons of mayonnaise with lemon juice;
A tablespoon each of olive oil and soy sauce;
Salt and pepper to taste.

For vegetable filling:

10 gherkins;
Forks of lettuce;
One bell pepper;
Greenery.

4 tablespoons each of flour and breadcrumbs;
2 eggs;
2 chicken breasts;
2 tablespoons each of mustard and mayonnaise with lemon juice (for marinade);
Pepper and salt;
Vegetable oil for frying.

Detailed recipe for twister from kfc:

The classic version of the snack includes strips. But this recipe includes nuggets. To prepare them, first marinate the chicken breast fillets yourself in a mustard-mayonnaise mixture, seasoned with salt and pepper;
For the flatbread dough, combine and grind the flour and melted butter into crumbs. Pour hot water and add salt. Knead a non-sticky, soft dough mass, place in a deep bowl, cover with a towel and leave to “rest” for half an hour;
Divide the ripe dough into 8 equal “koloboks”, each of which is rolled out into a flat cake a couple of millimeters thick. Bake each piece in a dry hot frying pan for two minutes on each side, setting the flame to medium. We quickly wrap the baked products in a bag so that they do not lose their softness;
For the sauce, combine all the products from the list and stir until smooth;
Pour flour into one bowl, beat eggs with a pinch of salt into another, and add breadcrumbs into a third. To make the dish even more tasty and aromatic, croutons can be combined with finely chopped garlic and a mixture of peppers;
Heat a frying pan with vegetable oil. Dip the marinated chicken fillet into the contents of each bowl one by one (in the order indicated above) and fry for 5-7 minutes on each side until a golden crust appears on the meat. Place the finished nuggets on paper napkins to remove excess fat;
For the vegetable filling, cut the gherkins and peppers into thin strips, finely chop the greens, leave the salad leaves whole;
Now we assemble our twister at home. Generously coat the flatbread with sauce, place a lettuce leaf on it, and place vegetable filling and meat on top of it.

Roll the product into a roll and serve.

Useful video

I really love fast food, especially the KFC twister. But there are no such establishments in our city, and through trial and error, I managed to make a twister that was even tastier and healthier than the one at KFC.

chicken fillet - 6 pcs.;
tomatoes - 3 pcs.;
lettuce leaves - to taste;
Mexican tortillas - 4 pcs.;
processed cheese - 4 pcs.;
flour - 4 tbsp. l.;
egg - 1 pc.;
oregano, ground pepper and salt - to taste;
Caesar dressing - to taste.

1. Sprinkle the fillet with oregano, ground pepper and salt on both sides.

2. Dip each piece into the beaten egg.

3. Then sprinkle with flour.

4. Dip into the beaten egg again.

5. And sprinkle with flour again.

6. Fry in a frying pan with the addition of vegetable oil until cooked.

7. Cut the tomatoes into thin circles. By the way, for this recipe it is better to take “Slivka” tomatoes; their consistency is denser and when finished they will not spread all over the flatbread.

8. Grease Mexican tortillas with Caesar sauce.

9. Wash the lettuce leaves well under running water and blot with a paper towel to remove excess moisture. Place on a flatbread.

10. Place chicken fillet on lettuce leaves.

11. Place tomatoes on the meat and add a little salt so that the twister doesn’t taste bland.

12. Cut the processed cheese in half and place it on the tomatoes.

13. Now we begin to roll up our home twister as shown in the following photos.

14. Fry them in a dry frying pan until golden brown.

This is what we got so delicious.

If you liked the recipe, subscribe to my channel and like it.

A similar Twister is offered by some fast food cafes. But homemade Twister is still better! Moreover, it is completely homemade - from the flatbread to the nuggets.

Simple homemade twister recipe

For preparation, the most common products are used, which can be found in all stores.

4 Armenian yeast-free lavash;
200 g of Chinese cabbage;
2 tomatoes;
400 g chicken fillet;
100 g hard cheese;
Spices to taste.

Cut the poultry meat into slices, rub with spices and lightly fry;
Cut the tomatoes into slices, separate 4 cabbage leaves from the fork;
We form our appetizer: place the chicken on the pita bread, then a leaf of Chinese cabbage, and slices of tomato on top. We complete the composition with grated cheese;
We fold the product into an envelope.

At this point, homemade fast food is ready. You can eat it as is, or put it in the oven for a couple of minutes so that the cheese melts. You can also use the microwave or lightly fry the twister in a frying pan.

Caesar roll

Many of us are true Caesar salad lovers. And if you wrap it in a bread tortilla or pita bread, you get a Caesar roll, which is so convenient to quickly eat for a snack while running into a fast food restaurant. But free up some time and make your own Caesar roll at home.

We will need:

Lettuce leaves - 200 g
Chicken fillet – 200 g
Hard cheese - 50 g
Brisket – 50 g
Rusks or croutons - 80 g
Tomato or bell pepper - 1 pc.
Caesar sauce - 4 tbsp.
Flatbread or lavash - 4 pcs.

Cooking method:

Cut the chicken fillet into small pieces and fry it.
Slice the brisket and fry until crispy.
Blot excess fat from the fried brisket pieces with a paper towel or napkin.
Finely chop the finished fried brisket.
Lightly chop and chop the white bread crackers.
Grate the cheese on a fine grater.
Mix all the ingredients in a large bowl: lettuce, fried chicken, finely chopped brisket, grated cheese.
Add sauce and stir.
Place the resulting mixture in the center of the flatbread or pita bread and sprinkle with crackers.
You can chop fresh tomatoes or bell peppers to taste.
Wrap and form a roll. For convenience, you can wrap it in cling film.
Our roll is ready!

Asian twister

This original appetizer will delight you with crispy-skinned chicken breast with the perfect combination of sweet and sour sauce, ginger and bacon, and the savory taste will please all guests.

2 pita breads;
200 g each of chicken fillet and lettuce leaves;
100 g pickled ginger;
50 g bacon or salami;
50 g sesame seeds;
4 large spoons of sweet and sour sauce.

Homemade twister recipe:

Cut the chicken fillet into small pieces, bread and fry until golden brown;
We'll do the same with bacon slices (but if you use sausage, you don't need to fry it);
Cover the surface of the pita bread with chicken, lettuce leaves, bacon, and pour sauce;
Lay out slices of pickled ginger, sprinkle with sesame seeds and wrap in a twister.

As an experiment, you can add various fresh vegetables, cheese, and seasonings to the recipe.

"Lazy" twister

This quick dish is made in a hurry, and the main ingredients - tortilla and nuggets - can be bought ready-made.

2-3 tomatoes;
4 Mexican flatbreads (tortilla);
A bunch of lettuce;
14 pieces of chicken nuggets (or package);
Mustard, mayonnaise.

How to make a twister like in CFS:

We heat the nuggets in the microwave, but the best option is to fry them in a frying pan;
Cut the washed tomatoes into cubes, wash the salad and chop them the same way;
Let's warm up the flatbreads (there is an explanation on the back of the package on how to do this). Can be heated in the microwave at 650 W for 15 seconds;
Let's start assembling delicious fast food: grease the tortilla with mayonnaise (if you like it spicy, add mustard), put a strip of tomatoes in the middle, but not all the way to the end of the tortilla. You need to leave room to wrap the workpiece well;
Place the salad on the tomatoes and place the nuggets on the sides of the tomatoes. The “strong half” can be given 4 chicken products in fast food so that a man can more than satisfy his hunger, and the “weak half” can get 3 nuggets;
Let's wrap our culinary miracle in this way: first one side, then fold the bottom and then the other side.

You can experiment with the filling as you please. It is better to make delicious fast food with tortilla rather than with pita bread, because it strongly absorbs tomato juice and mayonnaise dressing, and then can fall apart. And the flatbread remains “at its best” even after a day.

Twisters will serve as an excellent snack for you on a trip, at work, on a hike, or on the road.

I-twister cheese

Eye twister is one of the most famous fast dishes from KFC. This company regularly comes up with new varieties, but perhaps the most popular is the cheese i-twister.

A couple of lettuce leaves and tomato slices;
2 chicken nuggets or one corn-breaded strip;
Tortilla flatbread;
50 g cheese;
Cheese sauce, ketchup and mayonnaise.

At KFS, cheese dough is used for a special flatbread. But we'll use a regular tortilla. Lay it out on the table, put lettuce leaves on top;
Melt the cheese in the microwave and place in the next layer;
Next come chicken and tomatoes, topped with cheese dressing;
We wrap the product in an envelope and enjoy the amazing taste.

DIY silicone twister

Some fishermen prefer fishing with a twister. Convenient and maneuverable, it copes with the task perfectly. And it’s a pleasure to fish with it: the fish like active play that imitates the movements of a real fish, and because of its bright color it is easily visible in the water. The method of preparing the workpiece does not take much time, but it will last a long time.

To make a twister you will need:

First you need to reproduce an exact copy of the future twister. To do this, a neat body is formed from plasticine and left until the plasticine has completely hardened. Let's put it aside for now. You can make twisters from plasticine with a variety of patterns on the back and different lengths, and there’s no point in talking about the cost-effectiveness of this material.

We dilute the gypsum with water and pour it into a convenient form. You can make a wooden frame, but for quick execution, a juice box will do. Pour the plaster into the mold and wait until it begins to harden. Carefully lower our plasticine blank by half, having previously lubricated it with oil and wait. Complete drying time is 24 hours. But, according to experience, after 4-5 hours the workpiece can be obtained without difficulty. Using a scalpel, carefully level the surface.

Story

Fans of the game "Twister" should thank two American inventors for its creation - Twister Charles F. Foley and Neil W. Rabens.

It’s hard to imagine, but in the first years of its existence the game was not particularly popular. And all because of the wrong thing. Instead of promoting the product among young people (for whom this game could not be better suited), the management for some reason decided that they should be average American mothers aged about 35 years.

The fun would have been lost on the shelves of toy stores if not for His Majesty’s chance. On May 3, 1966, the host of the very popular Tonight Show, Johnny Carson, offered to play Twister to guest star Eva Gabor. And while the actress in her evening dress elegantly moved around the playing field, most of the spectators had already rushed to call stores and place an order for the purchase of “Twister”. After this momentous day, more than three million copies of the game were sold within a year.

Today, “Twister” is still just as popular, both in its native America and in other countries. And all rights belong to Hasbro.

Instructions for making twisters with your own hands

Many fishermen use a twister for fishing. A twister is a bait that has a flexible body with a sickle on the tail.

The bait has a number of advantages:

The flexible body resembles a small fish and completely imitates it.
Low cost.
Huge selection of different twister shapes.
It can be mounted on various equipment.
It can be used in any water table.
Thanks to its design, the twister has the ability to move through algae and rocky bottom.

Twisters are used for catching predatory fish: perch, pike, pike perch and catfish.

Preparation stage

Decide on materials, shape, size

Forms for future baits can be purchased in stores, but you can also make them yourself.

Making the mold first option:

To make a mold, you need to prepare a small box or frame for casting, plaster, and baits on which future twisters will be cast.
We are preparing the frame. It can be made of metal, cardboard, wood.
Install on a flat surface.
We lay out the bait.
Pour in plaster. You may not fill the frame completely. The main thing is to cover the prototypes.
After the plaster has dried , remove the plaster from the frame and remove the bait. The form is ready.

Making the mold second option:

Make it a rule, on every fishing trip, the first thing you do is start.

For work you need to prepare: wood, cardboard, plaster, foam plastic, plasticine.
The body of the future bait is made of wood. Using a file, we give the desired shape.
We cut out the future tail of the required thickness from cardboard .
Take a piece of foam plastic. We immerse the workpiece in it until halfway. We strengthen it around the perimeter with plasticine.
Using cardboard we make formwork. Securing joints with plasticine or other material.
Fill it with plaster and let it dry. The first half is ready.
We repeat the previous steps and make the second part of the form.
Let the forms dry completely. You can leave them on the battery for several days.
Then coat it with epoxy. In this case, the form must be hot. Apply several layers until the epoxy stops being absorbed. After which a glossy surface will appear, the shape will become more durable.

How to choose silicone for baits? There are two options:

You can use old spoiled baits. They can be melted down and a new one made. A huge plus is the color. When melting, all colors are mixed and a new shade appears.
You can buy special silicone designed for making baits. It is sold colorless. To add any shade, you need to additionally buy special dyes and glitter. It will be cheaper in cost.

We prepare the necessary tools and materials

Before starting casting you must:

Prepare the mold for casting.
Decide on the choice of tires and prepare them.
Prepare a container for melting rubber.
Prepare a water tank.

How to prepare silicone

After preparing the tools, you need to melt the silicone. The result should be rubber in a liquid state.

There are several melting methods:

On an open fire. This is the fastest way. However, this is the only plus. With this method, silicone melts very quickly and begins to smoke, burn, and change color.
The most acceptable method is melting in a microwave oven. Can be melted in a bowl or syringe. The first method is acceptable if several people or many molds are involved in casting. The second method is used to exclude any evaporation.

Which syringe to choose

The syringe and melting glass are the main tools for casting.

Second version of roulette

The game “Twister” could not resist innovations either. Making original fun with your own hands is not that difficult. For example, as an alternative to roulette, you can take

You will need to make two dice - one with a color, the other with a designation. Their peculiarity is that the number of sides will be four, and not six, like dice.

Therefore, we suggest you make cubes that resemble a brick in shape (as indicated in the picture).

There are two options for creating dice.

First:

Cut out two identical cube models from cardboard, then carefully glue them together.
Wait for the glue to dry.
Take one cube and glue or draw pictures on the long sides indicating parts of the body: left leg, right leg, left arm, right arm.
Take another cube and either paint the long sides or cover them with colored paper in the appropriate colors: red, blue, green and yellow.

Second option:

You make two layouts on the computer: one indicating the color, the other indicating the body part.
Print both options.
Glue the layouts into cubes.

The game is ready. To prevent your Twister from getting damaged or lost, allocate a special box for it.

Hello Country! Many people love fast food, but sometimes it is simply not clear from what products and with what hands it is made in a cafe. Once my husband and I tried a twister at KFC, he really liked it, and I decided to make him this twister at home. It turned out even tastier (as my husband said) than in the cafe!

We will need:

Mexican flatbread (tortilla) - 4 pcs; (there are 6 pieces in a package, I indicate 4 because the package of nuggets is enough for 4 pieces).

Chicken nuggets - 1 pack; (14 pcs in a package), (in the twister in the cafe, there were not nuggets, but strips, you can cook them yourself, just like nuggets, or buy them, they are also sold, but this time I didn’t find them).

Tomatoes - 2-3 pcs.; (depending on their size).

Leaf lettuce - 1 bunch;

Mayonnaise, mustard (for those who like it spicy).

Preparation: Heat the nuggets in the microwave or in a frying pan (I fry in a frying pan). Wash the tomatoes and cut into cubes. Wash the salad and cut it. Heat the flatbreads (on the back of the package it says how this can be done), I heat them in the microwave for 15 seconds. at 650W.

Next, we begin to assemble our twister into a pile))) We grease the flatbread with mayonnaise, you can add mustard (this is for those who like it spicy, I put more mayonnaise and mustard for my husband), put a strip of tomatoes in the middle, but not all the way to the end of the flatbread (at the bottom leave room to wrap), place the salad on the tomatoes, and place nuggets on the sides of the tomatoes. (I put 4 nuggets in a twister for my husband, 3 for myself (since there are 14 nuggets in the package)).

And we wrap our twister....first one side, then we bend the bottom, and then the other side.

Twister is ready! In general, the filling can be anything, your imagination will help you)) I showed how they are made at KFC, and how I make them. As for the tortilla...it’s better to take a tortilla like this rather than regular lavash, the lavash quickly becomes saturated with mayonnaise and tomato juice, and then begins to fall apart. It’s much better with flatbread, it doesn’t fall apart, even after a day.

The chef of the KFC restaurant chain, Alexander Garagaty, suggests making sandwiches for dinner: it’s fast, tasty and not troublesome.
A simple homemade Twister sandwich recipe step by step with photos. Easy to prepare at home in 15 minutes. Contains only 282 kilocalories. Author's recipe for home cooking.
Preparation time: 11 minutes
Cooking time: 15 min
Calorie count: 282 kilocalories
Servings: 2 servings
Difficulty: Easy recipe
National cuisine: Home cooking
Type of dish: Various

Manufacturing instructions

When the mold, tools and silicone are ready, you can proceed directly to making the bait. The process itself is very simple:

We fill the syringe with rubber. If the silicone was prepared in a syringe, then you can proceed to the second point.
Make sure there is no excess air. Otherwise, the bait will turn out to be heterogeneous, that is, with bubbles.
Place the mold in the required position and fill with silicone. Some have air vents. It is necessary to monotonously fill the mold until silicone appears from the air duct.
Turn the mold down and continue filling with silicone. Changing the position of the mold will prevent voids from forming in the silicone fish.
Wait a few minutes for the silicone to cool.
Remove the finished bait. Place in a container with water. You can also put a few ice cubes in there. This will allow the silicone to cool faster.
The fish is ready and you can try it in action.

Twisters are most often used with a jig head. In this case, they drown and bury themselves in the muddy bottom. To avoid this, this twister can be tuned. For this purpose, polystyrene foam is used.

First way

Prepare a hook, polystyrene foam, scissors.
Cut off half the body of the bait.
Put on the hook.
Make a cut piece of bait out of foam. Place foam on the free part of the hook.
The bait is ready.

Second way

Prepare a twister, a stationery knife, and polystyrene foam.
Use a utility knife to rip open the belly of the fish.
Cut a small piece from the foam.
Place this piece in the belly of the fish.
Seal with glue.

Toothbrush poppers

Quite often, fishing tricks and homemade products practically amaze the imagination of the craftsman who made them. Also, this shallow bait from a foreign manufacturer can be quite expensive. Directly for this reason there is significance in its independent production.

Poppers, like other do-it-yourself fishing gear, are also called walkers, being shallow baits, they are in no way obliged to sink. Only minor flooding is possible. Is it possible to use a material that will stay well on the water? These toothbrushes are primarily tested for buoyancy.

This is quite easy to do. It is enough to take water in a regular container and throw a brush in there. It must remain flat and not sink in any way. The activity is carried out using a small grinding machine with insert attachments, which in appearance resembles a grinder.

The production of this ingenious equipment for the purpose of fishing begins with sawing off the bristles from the brush. The resulting area must be processed with a sandpaper attachment. In the upper and lower lobes you will need to make a minor opening. It follows the purpose of attaching the tee with a ring with a swivel . Then the handmade bait needs to be painted. The tones must be colorful, for example, emerald and reddish. Tees are inserted into the nearly finished product.

Expert opinion

Valery Andreevich Sizov

Professional fisherman with 35 years of experience

Important!!! If you check the purchased system in the bathroom, you will find that due to its significant weight it is drawn to the bottom. This can be eliminated by gluing a limited strip of foam on top using superglue. In this form, the popper will stay on the water well and will also stop drowning.

Blitz tips

Gypsum should be diluted with water in a ratio of 1:3.
When making a mold, wire can be placed into the prototypes. This will allow you to maintain the correct shape of the future fish.
The hardening time of gypsum is approximately 12 hours.
hardening time is 3-5 minutes.
After the plaster has hardened, all unevenness in the form can be corrected. To do this, use a knife or sandpaper.
To quickly melt old baits, they must be cut into the smallest pieces.
It is better to use thermal gloves when working.
Silicone should be melted at a power of 600 W.
The melting process must be constantly monitored. Since it is very easy to ruin rubber. It is better to melt silicone in a transparent container.
It is necessary to melt the silicone until it becomes a not very liquid jelly.
When using a two-piece mold, unnecessary parts may form along the contour of the fish. They can be easily removed with scissors. And the remains can be used for further production.
Using tin lids and an iron you can make a fish tail. To do this, place the cut silicone between the lids and cover with an iron. Bring the rubber to melt. This takes approximately 15 minutes. As a result, you can get a homogeneous “pancake”. You can make a twister from it.
All precautions must be taken: work in a ventilated area and protect all exposed parts of the body.
Store the manufactured twisters in separate containers. Otherwise they will stick together and may change color.
You can apply a design to the finished bait with a waterproof felt-tip pen. If you apply red dots, the predator will think that the bait is wounded and weak. If you draw vertical black lines, the fish will think that this is not a bait, but a small perch.
A damaged twister can be fixed. To do this, heat the two parts of the bait under an open fire and connect tightly.
Ready fish can be immersed in a mixture of salt and attractant. This will give the rubber a smell, which will allow you to catch more fish.
When making it, it is better to use bright colors and mix them.
The cost of such baits is small. Therefore, making your own lures only makes sense if you want to make something unique and special.

Source